Jabsco 53040 Utility 040 1 inch self priming pump

Utility 40' 1" self-priming pump
110V & 230volt/1 phase/50Hz IP54 Electric Motor

53040-2001 - Neoprene impeller.

53040-2003 - Nitrile oil-resistant impeller.

53040-2021 - High pressure neoprene impeller.

53040-2103 - Nitrile oil-resistant impeller.

• Connections: - 1" BSP internal threaded ports
• Dimensions: - 300mm long, 210mm wide, 240mm high
• Output: - up to 35 litres/minute at 3m head. Max. differential pressure 1.6bar
• Built-in dry-running protection for up to 30 minutes after initial prime
• Rapid self-priming from dry up to 3m
• Will handle hard or soft solids
• Corrosion resistant bronze body, stainless steel shaft
• Carbon-ceramic mechanical shaft seal
• Simple, fully serviceable design with few wearing parts

Packaged Dimensions: L:39.00 x H:27.00 x W:29.00cm